 |
|||||
| SLT-HEB Series Sensor Protector The SLT-HEB Series of protectors is available as either a 4, 5, 8 or 10 Wire SPD (surge protective device) unit that will interface directly, in series, with 4 or 5 pin M12/Euro/DC Micro Connectors. Models are unidirectional due to connector configuration; where the male connector equals Line Side (unprotected) and the female equals the Load Side (Protected). Circuit performance is bidirectional. The SLT-HEB is designed to protect Sensors & Proximity Switches on Roller Coasters, Ski Lifts, Gondolas and other people-movers. Specification Sheet UL Listed |
|||||
 |
|||||
 |
|||||
| The HLP Series is designed to protect external lighting from surges. Lighting protection saves both parts and labor cost by preventing premature failures due to surges. • Weatherproof • No Follow Current • Line-to-Ground Protection • Solid State Design • LED Diagnostics Available Specification Sheet Installation Manual Listed to ANSI/UL 1449 Third Edition |
|||||
 |
|||||
 |
|||||
| TST: The TST Series is a Surge Protection Device that is designed to protect sensitive electronic equipment from the harmful effects of transients and RFI/EMI interface. Models are configured for either parallel or series installations and can be either din rail or wall mounted. The TST protects:
A TST Module is included in the ISPS Package for Security, Safety & Surveillance System Protection. Specification Sheet |
|||||
 |
|||||
 |
|||||
| Security, Safety & Surveillance Systems Protection Surge Protection Devices designed to protect the AC Power and Communication lines on Fire Alarms, Security Alarms and Surveillance Systems. Specification Sheet |
|||||
 |
|||||
 |
|||||
| RCHW: The RCHW Series provides high-energy surge protection and optional RF filtering for Residential, Commercial, Industrial and Remote Site applications. These hardwired units provide superior control over transients by delivering low clamping voltages combined with high surge energy handling capabilities. The RCHW can be installed at the Service Entrance of small Commercial buildings or hardwired directly to the equipment needing protection. Specification Sheet - Aluminum Housing |
|||||
 |
|||||
 |
|||||
|
MST: The patent pending MST Series is a modular, parallel installed, SPD (surge protection device) designed for commercial, industrial and residential applications. Models are available for all standard electrical services and provide 50kA of surge energy handling per phase. This rating is 5 times the energy handling of the IEEE's highest Category C location rating of 10kA/20kV using an 8x20µs waveform. (Non-Metallic Housing shown) Specification Sheet |
|||||
 |
|||||
 |
|||||
| MAP: Meter-Treater’s MAP Series represents a new era in Surge Protection with “smart sensing technology” that distinguishes between surges and overcurrent events. The inventive design, performance and universal application features of the MAP, makes it the ideal choice for Commercial and Light Industrial applications. Specification Sheet Installation Manual UL 1449 3rd Edition SPD for Type 1 or Type 2 Locations |
|||||
 |
|||||
 |
|||||
|
BPT: The BPT Series is a Transient Protection System that provides heavy-duty surge protection and filtering against harmful transient energies. Standard form C dry contacts and optional surge counter. Specification Sheet |
|||||
 |
|||||
 |
|||||
|
MPT: The MPT Series is a modular Transient Protection System that provides heavy-duty surge protection and filtering against harmful transient energies. Standard form C dry contacts and optional surge counter and remote monitor/alarm. (Non-Metallic Housing shown) Specification Sheet |
|||||
 |
|||||
 |
|||||
| RPM Modules: Replaceable protection modules that incorporate large diameter MOV technology and patented thermal overload protection. Specification Sheet |
|||||
 |
|||||
 |
|||||
| RPM Kit for OEM Applications
Specification Sheet |
|||||
 |
|||||
|
Secondary Protection |
Since 1986