  |
|||||
| RCHW: The RCHW Series provides high-energy surge protection and optional RF filtering for Residential, Commercial, Industrial and Remote Site applications. These hardwired units provide superior control over transients by delivering low clamping voltages combined with high surge energy handling capabilities. The RCHW can be used at the Service Entrance or it can be installed directly at the equipment needing protection. Specification Sheet - Aluminum Housing Specification Sheet - NonMetallic NEMA 4X Housing Installation Manual - Standard Device UL 1449 3rd Edition SPD for Type 1 or Type 2 Locations |
|||||
 |
|||||
 |
|||||
| The 575 Series Low Profile Meter Based SPD stops surges right at the electric meter before they can enter the house. The 575 is based on a proven design that has been in the field since 1987. Specification Sheet Installation Manual Listed to ANSI/UL 1449 3rd Edition. |
|||||
|
|||||
 |
|||||
| The Model 400 Series Meter-Based Surge Suppressor is a derivative of the original 1987 design, with twin red LED's to monitor unit status. Specification Sheet Installation Manual Listed to ANSI/UL 1449 3rd Edition. |
|||||
|
|||||
 |
|||||
| The Model CL-320 Meter-Based Surge Suppressor is designed for Class 320 Amp Continuous. This unit is ideal for both Residential and Light Commercial Applications. Specification Sheet Installation Manual Listed to ANSI/UL 1449 3rd Edition |
|||||
|
|||||
 |
|||||
| The 675-3PA three phase secondary surge arrestor is designed for 240 Volts phase to ground and has a surge current rating of 57kA per phase (171kA total). Specification Sheet Installation Manual Listed to ANSI/UL 1449 3rd Edition |
|||||
|
|||||
 |
|||||
| The HLP Series is designed to protect lighting and fire alarms from surges. The HLP saves both parts and labor cost by preventing premature failures due to surges. The HLP provides protection for Fire and Security Alarm Systems and Electronic Ballasts. Compatible with most brands including Advance, Universal and many more. • Weather Resistant • No Follow Current • Line-to-Ground Protection • Solid State Design • LED Diagnostics Available Specification Sheet Installation Manual Listed to ANSI/UL 1449 3rd Edition |
|||||
 |
|||||
 |
|||||
| TST: The TST Series is a Surge Protection Device that is designed to protect sensitive electronic equipment from the harmful effects of transients and RFI/EMI interface. Models are configured for either parallel or series installations and can be either din rail or wall mounted. The TST protects:
Specification Sheet |
|||||
 |
|||||
 |
|||||
|
MST: The patent pending MST Series is a modular, parallel installed, SPD (surge protection device) designed for commercial, industrial and residential applications. Models are available for all standard electrical services and provide 50kA of surge energy handling per phase. This rating is 5 times the energy handling of the IEEE's highest Category C location rating of 10kA/20kV using an 8x20µs waveform. Specification Sheet |
|||||
 |
|||||
 |
|||||
| MAP: Meter-Treater’s MAP Series represents a new era in Surge Protection with “smart sensing technology” that distinguishes between surges and overcurrent events. The inventive design, performance and universal application features of the MAP, makes it the ideal choice for the Service Entrance. Specification Sheet Installation Manual UL 1449 3rd Edition SPD for Type 1 or Type 2 Locations |
|||||
| |
|||||
| TLT (Telephone Line Treater) Series: The TLT Series provides secondary transient voltage surge suppression for (per UL 497A) Telco line protocols. Units provide protection against transients that exceed the nominal operating voltage of Dial-Up, DDS, Dedicated/Leased and T1 lines. The TLT Series is designed to protect Credit Card Validators and other Modem devices. Specification Sheet |
|||||
|
|||||
 |
|||||
|
Secondary Protection |
|||||
Since 1986