 |
|||||
| The HLP Series is designed to protect lighting and fire alarms from surges. The HLP saves both parts and labor cost by preventing premature failures due to surges. The HLP provides protection for Highway Lighting, Traffic Lights, Fire and Security Alarm Systems and Electronic Ballasts. Compatible with most brands including Advance, Universal and many more. • Weather Resistant • No Follow Current • Line-to-Ground Protection • Solid State Design • LED Diagnostics Available Specification Sheet Installation Manual Listed to ANSI/UL 1449 3rd Edition |
|||||
 |
|||||
 |
|||||
| TST: The TST Series is a Surge Protection Device that is designed to protect sensitive electronic equipment from the harmful effects of transients and RFI/EMI interface. Models are configured for either parallel or series installations and can be either din rail or wall mounted. The TST protects:
Specification Sheet |
|||||
 |
|||||
  |
|||||
| RCHW: The RCHW Series provides high-energy surge protection and optional RF filtering for Residential, Commercial, Industrial and Remote Site applications. These hardwired units provide superior control over transients by delivering low clamping voltages combined with high surge energy handling capabilities. The RCHW can be used at the Service Entrance of small Commercial buildings or it can be installed directly at the equipment needing protection. Specification Sheet - Aluminum Housing Specification Sheet - NonMetallic NEMA 4X Housing Installation Manual - Standard Device UL 1449 3rd Edition SPD for Type 1 or Type 2 Locations |
|||||
 |
|||||
 |
|||||
|
MST: The patent pending MST Series is a modular, parallel installed, SPD (surge protection device) designed for commercial, industrial and residential applications. Models are available for all standard electrical services and provide 50kA of surge energy handling per phase. This rating is 5 times the energy handling of the IEEE's highest Category C location rating of 10kA/20kV using an 8x20µs waveform. Specification Sheet |
|||||
 |
|||||
 |
|||||
| Security, Safety & Surveillance Systems Protection Surge Protection Devices designed to protect the AC Power and Communication lines on Fire Alarms, Security Alarms and Surveillance Systems. Specification Sheet |
|||||
|
|||||
 |
|||||
| MAP: Meter-Treater’s MAP Series represents a new era in Surge Protection with “smart sensing technology” that distinguishes between surges and overcurrent events. The inventive design, performance and universal application features of the MAP, makes it the ideal choice for Commercial and Light Industrial applications. Specification Sheet Installation Manual UL 1449 3rd Edition SPD for Type 1 or Type 2 Locations |
|||||
| |
|||||
 |
|||||
|
BPT: The BPT Series is a Transient Protection System that provides heavy-duty surge protection and filtering against harmful transient energies. Standard form C dry contacts and surge counter. Specification Sheet |
|||||
|
|||||
 |
|||||
|
MPT: The MPT Series is a modular Transient Protection System that provides heavy-duty surge protection and filtering against harmful transient energies. Standard form C dry contacts and surge counter with an optional remote monitor/alarm. Specification Sheet |
|||||
|
|||||
 |
|||||
| RPM Modules: Replaceable protection modules that incorporate large diameter MOV technology and patented thermal overload protection. Specification Sheet Specification Sheet |
|||||
|
|||||
| TLT (Telephone Line Treater) Series: The TLT Series provides secondary transient voltage surge suppression for (per UL 497A) Telco line protocols. Units provide protection against transients that exceed the nominal operating voltage of Dial-Up, DDS, Dedicated/Leased and T1 lines. The TLT Series is designed to protect Credit Card Validators and other Modem devices. Specification Sheet |
|||||
|
|||||
 |
|||||
|
Secondary Protection |
|||||
 |
 |
 |
Since 1986