Meter-Treater, Inc.
Specialized
 Highway Lighting Surge Protection

HLP Series for Lighting Protection

The HLP Series is designed to protect lighting and alarm systems from surges.

The HLP provides protection for Highway Lighting, Traffic Lights, Fire and Security Alarm Systems and Electronic Ballasts. Compatible with most brands including Advance, Universal and many more.

The products features include:

• Weatherproof
• No Follow Current
• Line-to-Ground Protection
• Solid State Design

Specification Sheet
 Surge Protection for Security and Surveillance Systems Integrated Security Protection System
The ISPS Package represents a total surge protection approach for intelligent transportation systems (ITS), law enforcement and military
agencies or any public or private operation concerned with uptime performance and reliability of their security monitoring and control systems.

M-Ti’s ISPS Package provides a high level of operational security to the cameras, computers, monitors, recorders and cables encompassing the
modern surveillance system.

Specification Sheet
 Surge Protection for Meter Modems

SLT Series for Meter Modems

Transient Voltage Surge Suppression for standard low speed data (25MHz max), communication and signal line protocols.  Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data.  Each line is protected against surge current impulses up to 10kA, depending upon circuit configuration.

The SLT Series works in series with the communication lines being protected, diverting harmful transient energies while maintaining a tight clamp at the peak voltage.

Specification Sheet
Surge Protection for Fire Alarms Fire Alarm Surge Protection

Surge Protection Devices designed to protect the AC Power and Communication lines on a Fire Alarm System.

Specification Sheet
 Surge Protection for Proximity Sensors SLT-HEB Series Sensor Protector

The SLT-HEB Series of protectors is available as either a 4, 5, 8 or 10 Wire SPD (surge protective device) unit that will interface directly, in series, with 4 or 5 pin M12/Euro/DC Micro Connectors. Models are unidirectional due to connector configuration; where the male connector equals Line Side (unprotected) and the female equals the Load Side (Protected). Circuit performance is bidirectional.

The SLT-HEB is designed to protect Proximity Sensors/Switches for Ski Lifts, Gondolas, Roller Coasters, Monorails, Escalators, Elevators and Conveyors.

Specification Sheet


 

Meter-Treater Made in USA 
Since 1986