Communication Line
 |
TLT (Telephone Line Treater) Series: The TLT Series provides secondary transient voltage surge suppression for (per UL 497A) Telco line protocols. Units provide protection against transients that exceed the nominal operating voltage of Dial-Up, DDS, Dedicated/Leased and T1 lines. |
 |
TLT (Telephone Line Treater) Series: The TLT Series provides secondary transient voltage surge suppression for (per UL 497A) Telco line protocols. Units provide protection against transients that exceed the nominal operating voltage of Dial-Up, DDS, Dedicated/Leased and T1 lines. |
 |
The
TLT-66 ID Models provide Secondary Transient Voltage Surge
Suppression for Telephony line protocols. Units protect against
Transient Voltages that exceed the nominal operating voltages
of Dial-Up, T1/E1, DSL and Dedicated/Leased Lines. Each line
is protected against surge current impulses up to 1kA/wire.
The TLT Series installs in series with the telephone lines to be protected, diverting harmful transient energies to ground while maintaining close clamping thresholds above normal service voltages. |
 |
The SST Series is configured to work in series or parallel with the measurement/control lines being protected, diverting harmful transient energies while maintaining a tight clamp at the peak voltage. |
 |
DLT (Data Line Treater) Series: The CTI Series provides transient voltage surge suppression for all EIA communication and signal line protocols with data speeds up to 155MHz. Units provide protection against any transient voltages that exceed nominal operating voltage. Each line is individually protected against surge current impulses; units are UL 497B Listed. |
 |
SLT (Signal Line Treater) Series: The SLT Series is a multistage, hybrid protector specifically designed for low voltage and low to medium frequency applications up to and including category 4 wiring. Models are available for all EIA protocols, 4 - 20mA current loop and standard signal applications from 5Vdc to 200Vdc. Connector interface choices are modular jack, DB9, 15 & 25 and 3 position terminal block. |
 |
The SLT/HEB Series of protectors is available as either a 4 Wire SPD (surge protective device) or an 8 Wire unit that will interface directly, in series, with 4 pin Euro-Connectors or DC Micro Connectors. Models are unidirectional due to connector configuration; where the male connector equals Line Side (unprotected) and the female equals the Load Side (Protected). Circuit performance is bidirectional. |
 |
CLT-XT (Coaxial Line Treater) Series: The CLT-XT Series is specifically designed for CCTV and CTV applications. Models are available with one, two, or three input/outputs with either standard TV F-connectors or CCTV BNC connectors. |
| CAT6 Series - The CAT6 Series Surge Protectors are designed to protect Category 6 structured wiring systems. They are completely compliant with TIA/EIA networks and are also backwards compatible with Category 5 and Category 5E installations. |
 |
Product Data Sheets can be viewed in Adobe Acrobat Reader. |