CL320 Heavy Duty

100% Modular - Field replace/upgrade​
Surge Ratings: 50kA or 100kA​
In 10/20kA
Available in NEMA 3R, 4, 4X or 12 Enclosures​
ETL listed to ANSI/UL 1449 Standard​
15 YEAR Warranty​
The 675-3PAL is a 3 phase (200 Amp max) Type 1 SPD. Designed with the same surge performance ratings as the 400 and 575 Series meter based SPDs.
Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge current impulses up to 10kA.

RCHW POLYCASE

50 to 100kA Surge Rating
100kA RMS Symmetrical Fault Rating
In 10/20kA
Listed to ANSI/UL 1449 Standard
Additional Options Available
15 YEAR Warranty 
Series Installation for either wall or Din Rail
  mounting
Handles surges up to 200A
Protects POE lines with 100Mbps & 100Mhz 
ETL Listed to UL497B
15 YEAR Warranty 

SLT HEB SERIES

POWER - UTILITY

SST SERIES

DRM-K SERIES

Simple design capable of multifunction uses​
Mount Auxiliary and optional din rail
  equipment​
Incorporate surge protection directly with 
​ critical operating systems​
The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.

CLT SERIES

The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.
These hardwired units provide superior control over transients by delivering low clamping voltages combined with high surge energy handling capabilities.
Din Rail or Wall Mountable​
Series Installation​
Handles Surges up to 20kA​
Insertion Loss of -3dB @ 250Mhz​
ETL Listed to UL 479B​
15 YEAR Warranty​

SLT SERIES

The CLT Series provides Bidirectional Transient Voltage Surge Suppression for Coaxial BNC apps. Surge protection voltages above 10V center core to shield andsurge impulse currents up to 20kA.
Solid State 20mm MOV Design​
Line-to-Ground Protection​
LED Status Diagnostics​
Listed to ANSI/UL 1449 
No Follow Current​
15 YEAR Warranty 
Smart sensing technology
Surge suppresion up to 57kA
2000 Joules per Phase
In 20kA
Listed to ANSI/UL 1449 Standard
15 YEAR Warranty 

SLT CAT6 POE

DRM-K SERIES

Device provides protection against transient voltages that exceeds the nominal operating voltage of incoming data. Each line is protected against surge impulses up to 200A
Din rail or wall mountable
Protects CAT6 data lines with 1000Mbps &
  250 Mhz​
RJ45 (female to female) connection method​
ETL Listed to UL497B​
15 YEAR Warranty 
Configured for parallel installation. All models for Type 1 or Type 2 service panel applications. On-board diagnostics with LED indicators that continuously monitor the operational status of the entire unit.
Protection from 7.5V to 220V​
4 to 8 Lines Protected​
Protected Shield to Ground​
Earth Ground Terminal on Both Sides​
ETL Listed to UL497B​
15 YEAR Warranty 

COMMUNICATIONS - DATA/NETWORKING

MST SERIES

300kA Max Surge Current per phase
100kA RMS Symmetrical Amps​
In 10/20kA Aluminum or Polycarb Enclosures
Listed to ANSI/UL 1449 Standard
Additional Options Available
15 YEAR Warranty 
The patent pending MST Series is a modular, parallel installed, SPD (surge protection device). Models are available for all standard electrical services and provide 100kA of surge energy handling per phase.
Simple design capable of multifunction uses​
Mount Auxiliary and optional din rail
  equipment​
Incorporate surge protection directly with 
​ critical operating systems​
300kA Max Surge Current per phase
100kA RMS Symmetrical Amps​
In 10/20kA Aluminum or Polycarb Enclosures
Available in NEMA 4, 4X or 12 Enclosures​
Listed to ANSI/UL 1449 Standard​
15 YEAR Warranty​
Protects CAT5e data lines with 100Mbps &
​ 100Mhz
Handles surges up to 500A
 Series installation for either wall or Din Rail
Up to 8 lines protected
ETL Listed to UL497B
15 YEAR Warranty 

DRM-K SERIES

The MPT Series is a modular Transient Protection System providing high-energy surge protection and optional RF filtering for Commercial,Industrial and Remote Site applications. Fast easy installation.

RCHW POLYCASE

The Model 400 Series Meter-Base Surge Protector is a derivative of the original 1986 design. Equipped with twin 40mm MOVs and 2 red Monitor LED's. The 400 series is an excellent primary Type 1 SPD.

Device provided protection against transient voltages that exceeds the nominal operating voltage of incoming data. Each line is protected against surge impulses up to 200A.

Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge current impulses up to 10kA.
These hardwired units provide superior control over transients by delivering low clamping voltages combined with high surge energy handling capabilities.

​​RCHW ALUMINUM EXTRUSION CASE

The 575 Series is a low profile version of the 400 Series. Based on field proven design & surge tested technology the 575 Series provides cost-effective primary protection. Series installation. 

• Protection from 7.5V to 220V​
• 4 to 8 Lines Protected​
• Protected Shield to Ground​
• Earth Ground Terminal on Both Sides​
• ETL Listed to UL497B​
• 15 YEAR Warranty 

POWER

MST SERIES

50 to 200kA Surge Ratings
100kA RMS Symmetrical Fault Rating
In 10/20kA 
Listed to ANSI/UL 1449 Standard
Additional Options Available
15 YEAR Warranty 

DRM-K SERIES

50kA Surge Ratings
100kA RMS Symmetrical Fault Rating
In 10/20kA
Glass filled polycarbonate enclosure
Listed to ANSI/UL 1449 Standard
15 YEAR Warranty​
Devices are designed to protect sensitive electronic equipment from the harmful effects of transients

COMMUNICATIONS - SPECIAL APPLICATIONS

The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.
Simple design capable of multifunction uses​
Mount Auxiliary and optional din rail
  equipment​
Incorporate surge protection directly with 
​ critical operating systems​
2000 Joules per Phase
In 20kA
 Response time < 15 nanoseconds
4 Heavy-Duty Machined Jaw Blades​
Listed to ANSI/UL 1449 Standard
15 YEAR Warranty 
Simple design capable of multifunction uses​
Mount Auxiliary and optional din rail
  equipment​
Incorporate surge protection directly with 
​ critical operating systems​

MAP SERIES

COMMUNICATIONS - CCTV/CATV

50 to 100kA Surge Rating
100kA RMS Symmetrical Fault Rating
In 10/20kA
Listed to ANSI/UL 1449 Standard
Additional Options Available
15 YEAR Warranty 
50kA Surge Ratings
100kA RMS Symmetrical Fault Rating
In 10/20kA
Glass filled polycarbonate enclosure
Listed to ANSI/UL 1449 Standard
15 YEAR Warranty​
Transient Voltage Surge Suppression for Telephony line protocols. Units provide protection against Transient Voltages that exceed the nominal operating voltage of Dial-Up, Dedicated/Leased and T1 Lines.

SLT HEB SERIES

Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge current impulses up to 10kA.
50 to 200kA Surge Ratings
100kA RMS Symmetrical Fault Rating
In 10/20kA 
Listed to ANSI/UL 1449 Standard
Additional Options Available
15 YEAR Warranty 
The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.
Protection from 7.5V to 220V​
4 to 8 Lines Protected​
Protected Shield to Ground​
Earth Ground Terminal on Both Sides​
ETL Listed to UL497B​
15 YEAR Warranty 
Smart sensing technology
In 20kA
2000 Joules per Phase
Listed to ANSI/UL 1449 Standard
15 YEAR Warranty​

CLT SERIES

MAP SERIES

TST SERIES

TLT SERIES

​​RCHW ALUMINUM EXTRUSION CASE

675 SERIES

These hardwired units provide superior control over transients by delivering low clamping voltages combined with high surge energy handling capabilities.
Units provide protection against transient voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge impulses up to 500A.

SLT CAT5 POE

SLT SERIES

Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge current impulses up to 400A.
The CL320 Series is designed for Class 320 service & can handle up to 320 Amps continuous. Equipped with extra heavy duty jaw blades to accommodate current ratings.
Dial-up Lines, DDS Lines,T1/E1, Leased Lines
Series Installation​
Din Rail or Wall Mountable​
ETL Listed to UL 497A
Indoor/Outdoor applications
15 YEAR Warranty 
Protection from 7.5V to 220V​
4 to 8 Lines Protected​
Protected Shield to Ground​
Earth Ground Terminal on Both Sides​
ETL Listed to UL497B​
15 YEAR Warranty 
MAP Series represents a new era in Surge Protection with it’s “one size fits all” application flexibility. All units contain short circuit and thermal fusing, a “smart sensing technology” that distinguishes between surges and overcurrent events.

400 SERIES

575 SERIES Low Profile

MPT SERIES

Din rail or wall mountable
Protects CAT6 lines with 1000Mbps & Mhz
Configured for 10/100/1000 Ethernet data or
​ similar protocol
ETL Listed to UL 497A
15 YEAR Warranty 


MST SERIES

100% Modular - Field replace/upgrade​
Surge Ratings: 50kA or 100kA​
In 10/20kA
Available in NEMA 3R, 4, 4X or 12 Enclosures​
ETL listed to ANSI/UL 1449 Standard​
15 YEAR Warranty​
The custom configurable DRM-K assembly is used to optimize the interfaces between equipment and available mounting space.
The HLP Series is a Type 4 SPD designed to protect​ Traffic Signals, Highway Lighting, Parking Lighting, Interior Lighting, Security Systems, Fire Alarms.
Simple design capable of multifunction uses​
Mount Auxiliary and optional din rail
  equipment​
Incorporate surge protection directly with 
​ critical operating systems​
Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge current impulses up to 10kA.

SLT HEB SERIES

RPM MODULES


Protect your AC, Washer, Dryer, Stove, Dishwasher, Refrigerator, Central Vacuum, Ceiling Fans, Garage Door opener, etc.
An electrical surge can cause thousands of dollars worth of damage to your precious equipment. A small investment protects your whole house and gives you peace of mind.
RESIDENTIAL
The CLT Series provides Bidirectional Transient Voltage Surge Suppression for Coaxial BNC apps. Surge protection voltages above 10V center core to shield andsurge impulse currents up to 20kA.

BPT SERIES

Unit provides protection against Transient Voltages that exceed the nominal operating voltage of incoming data. Each line is protected against surge current impulses up to 10kA.

DRM-K SERIES

Protection from 7.5V to 220V​
4 to 8 Lines Protected​
Protected Shield to Ground​
Earth Ground Terminal on Both Sides​
ETL Listed to UL497B​
15 YEAR Warranty 

SLT CAT6 DIN

COMMUNICATIONS

HLP SERIES

SLT CAT 5E

Din rail or wall mountable
Handles surges between 10-40kA
Small terminals handle up to 15A w/ #14 to
  #30AWG wire
Large terminals handle up to 30A w/ #6 to
​ #20 AWG wire
Listed to ANSI/UL 1449 Standard
15 YEAR Warranty​

DRM-K SERIES

MAP Series represents a new era in Surge Protection with it’s “one size fits all” application flexibility. All units contain short circuit and thermal fusing, a “smart sensing technology” that distinguishes between surges and overcurrent events.
Smart sensing technology
Listed to ANSI/UL 1449 Standard
2000 Joules per Phase
In 20kA
Surge protection up to 57kA
15 YEAR Warranty 
Din Rail or Wall Mountable​
Series Installation​
Handles Surges up to 20kA​
Insertion Loss of -3dB @ 250Mhz​
ETL Listed to UL 479B​
15 YEAR Warranty​
These hardwired units provide superior control over transients by delivering low clamping voltages combined with high surge energy handling capabilities.
The patent pending MST Series is a modular, parallel installed, SPD (surge protection device). Models are available for all standard electrical services and provide 100kA of surge energy handling per phase.

COMMUNICATIONS -TELCO/TELEPHONY

COMMUNICATIONS - SIGNAL